Filter
Top Products
172
If you want to navigate to the found intersection, just press
MENU|ENT|EXIT.
Find Waypoints
1. Press WPT|↑ to MY WAYPOINTS|ENT.
2. If searching for the nearest waypoint, select
NEAREST and press ENT. If
searching by name, highlight
NAME and press ENT. (To search by name,
jump to step 5.)
Find By Nearest command (left). Find by Name command (center).
List of the nearest waypoints (right).
3. When you are searching for the nearest waypoint, a list of waypoints
appears with the closest location highlighted at the top of the list and
the one furthest from you at the bottom of the list.
4. To see location information on the closest waypoint, press
ENT and the
Waypoint Information screen appears.
A. To navigate to the waypoint, press
ENT. The Go To Waypoint
command is already highlighted. The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press ↓ to
FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
To clear these menus and return to the main page display, press
EXIT
repeatedly.
5. If you are looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ ↓ to change the first let-
ter, then press → to move the cursor to the next letter and repeat until
the name is correct, then press
ENT|ENT. B. Or you can jump down to
the lower selection list by pressing
ENT, then press ↓ ↑ to select a way-
point from the list, then press
ENT. The waypoint information screen
appears.