Filter
Top Products
35
Install the gimbal bracket. Position the bracket so the arms slope to-
ward the front of your unit.
Drill a 1-inch (25.4 mm) hole in the dash for the power and transducer
cables. The best location for this hole is immediately under the gimbal
bracket location. This way, the bracket can be installed so that it covers
the hole, holds the cables in position and results in a neat installation.
Some customers prefer to mount the bracket to the side of the cable
hole. It's a matter of personal preference.
Front view (left) and side view (right) showing dimensions of the
SeaCharter 640cDF unit when mounted on gimbal bracket.
Millimeter
[Inch]
27.6
[1.09]
77.1
[3.03]
137.9
[5.43]
56.9
[2.24]
Front
157.9
[6.22]
173.9
[6.85]