Filter
Top Products
1-16
Save as... saves your new configuration to either the Memory Module or the
data pack 100. See Figure 1-16 and Figure 1-17. The Memory Module
holds up to 10 typical configurations, and contains the operating system
software, and device application software in nonvolatile memory. The data
pack stores up to 100 typical configurations in nonvolatile removable
memory.
FIGURE 1-16. Save As... Menu.
FIGURE 1-17. Location Menu.
You can also use the Save As... menu to enter or edit the configuration name
and data type. Data Type Standard provides a Data Type menu with editable
options. Standard is the set of editable variables used when defining a new
device configuration. Partial is a set of marked variables. Full is the set of all
device variables.
NOTE: Configurations created offline in the HART Communicator will not
transfer to Asset Management Solutions (AMS) software; however, ‘Full’
configurations saved from a field device to a HART Communicator may be
uploaded to AMS. Configurations saved as ‘Full’ from an online device may
also be transferred directly to AMS.
After you have made all desired changes, save your new configuration to a
storage location and return to the Offline menu. Refer to Storage Location
Menu on page 1-28 for more information.