Filter
Top Products
1-19
Rename accesses the Configuration Name editing menu. After making
name changes, enter and save the data to return to the previous storage
location menu.
Compare compares a selected device configuration from a stored location
with another device configuration. The HART Communicator compares
device types, variables, marked lists, etc. Messages will appear indicating
whether the configurations compared are the same or different. Press OK to
return to the storage location and your list of device configurations. Find and
make any necessary changes resulting from your comparisons.
In order to produce a “Same / Differ” result, the following conditions must be
met when comparing two configurations:
1. Device type (including manufacturer), device type number, device revi-
sion, and DD revision must match exactly.
2. Configurations can only be compared against other configurations
containing the same set of variables. The Communicator will notify you if
this condition is not met.
3. The format of data storage must match exactly. The Communicator will
notify you if this condition is not met.
User assigned configuration names are not considered, as they will differ.
ONLINE MENU
With a HART-compatible device connected, press on the Main menu
to access the Online menu (Figure 1-21).
FIGURE 1-21. Online Menu.
The Online menu displays the name of the device on the first line of the LCD.
You have complete functionality for a specific device only when that device
description is present in the HART Communicator. If the DD is not present in
the HART Communicator, contact your nearest service representative.
The Online menu can be different depending on the connected device. See
your device-specific manual for Online menu details. Or, see Section 3 for a
selection of device-specific menu trees.
2
VWX
5ø
12.øøø