Filter
Top Products
1-38
Replacing the Memory Module
Refer to Figure 1-43 and Figure 1-44, and use the following steps to replace
the Memory Module:
FIGURE 1-44. Memory Module Replacement.
1. Completely loosen the three captive screws holding the Communicator
battery pack.
2. Grasp the battery pack and pull it straight up from the Communicator. Do
not bend the battery pack’s connecting pins during the process.
3. Loosen the two captive screws holding the Memory Module.
4. Grasp the Memory Module and pull it away from the Communicator.
5. Align the new Memory Module with the Communicator, tighten the two
screws, and replace the battery pack.
Explosions can result in death or serious injury. Do not remove or replace
battery pack in anexplosive atmosphere.
WARNING
!