Filter
Top Products
1-32
4. Press (F1) to add the option to the Hot Key menu for all of the HART-
compatible devices supported in your Communicator; or, press (F4)
to add the option to the Hot Key menu for the specific device to which you
are currently connected. See Figure 1-36.
FIGURE 1-36. Adding a Hot Key Option.
5. If the message “Mark as read only variable on Hot Key menu?”
Figure 1-37 displays, press (F1) to mark the variable for this option
as read-only, or press (F4) to mark the variable as read/write. For
example, marking the tag number ofa device to be read-only allows you to
view, but not change, the tag number through the Hot Key menu.
FIGURE 1-37. Marking a Read-Only Hot Key Option.
When adding a variable such as tag number, you can choose to display
the current variable value as part of the menu option. If you choose to
display the value of the variable in the Hot Key menu, the value appears
next to the option. Figure 1-38 shows the value of the tag displayed next
to the tag option on the Hot Key menu.
FIGURE 1-38. Hot Key Menu.
ALL
ONE
YES
NO