Filter
Top Products
1-36
Changing Alkaline Batteries
Refer to Figure 1-43 and use the following steps to change alkaline
batteries:
FIGURE 1-43. Battery Pack Removal.
1. Completely loosen the three captive screws holding the Communicator
battery pack.
2. Grasp the battery pack and pull it away from the Communicator. Make
sure not to bend the pins connecting the battery pack to the
Communicator.
3. Remove and properly dispose of batteries.
4. Referring to the battery orientation diagram inside the battery pack, insert
five new AA alkaline batteries.
5. Carefully align the pins with the Communicator base and replace the
battery pack.
6. Tighten the three screws.
7. Turn on the Communicator to verify operation and ensure the batteries are
installed properly.
Explosions can result in death or serious injury. Do not remove or
replace battery pack in an explosive atmosphere.
WARNING
!