Filter
Top Products
2-4
DEVICE SETUP MENU
As shown in Figure 2-2, the Device Setup menu contains the following five
options:
Press to access the Device Setup menu from the Online menu. The
options on this menu (Figure 2-2) are described in the following paragraphs.
FIGURE 2-2. Device Setup Menu.
Process Variables
Press to access the Process Variables menu.
This menu lists all process variables and their values. These process
variables are continuously updated.
Diag/Service
Press to access the Diag/Service menu.
This menu offers device and loop tests as well as calibration options. Figure
2-3 illustrates a typical menu.
FIGURE 2-3. Diagnostics and Service Menu.
Test device initiates a diagnostic routine at the device and can report an
electronics failure, as well as other failures that can affect performance.
1
STU
1
STU
2
VWX