Furuno 1823C Marine RADAR User Manual


 
5. CUSTOMIZING YOUR UNIT
5-2
Contents of general setup menu
Item Description Settings
Key Beep Turns key beep on/off. On, Off
Language Chooses menu language. English, French, German, Italian, Portuguese,
Spanish
Range Unit Chooses unit of range and speed
measurement.
nm, kt; km, km/h; sm, mph; nm & yd, kt; nm &
m, kt; km & m, km/h; sm & yd, mph
Temperature
Unit
Chooses unit of water temperature
measurement.
°C,°F
Depth Unit Chooses unit of depth measurement. ft, m, fa,
P/B (Passi/Braza)
Temperature
Source
Chooses source of water temperature
data.
ETR, NMEA. Select ETR to show water
temperature data fed from the network
sounder.
Depth Source Chooses source of depth data. ETR, NMEA. Select ETR to show depth data
fed from the network sounder.
Reset Trip
Log
Resets distance run to zero. Yes, No
Speed
Source
Choose source of own ship’s speed
data.
ETR, NMEA
Lat/Lon
Display
Chooses how many digits (or seconds)
to display after decimal point in latitude
and longitude position.
DD°MM.MM’, DD°MM.MMM’,
DD°MM.MMMM’, DD°MM’SS.S”
TD Display Chooses TD type. Loran C, Decca
Speed Chooses speed format to display. SOG (Speed over ground), STW (Speed
through water)
Position
Display
Chooses position display format. LAT/LON, TD
Time Display Chooses time notation. 12 hours, 24 hours
Infrared
Remote
Mode
A remote controller can be set
exclusively for use with a specific
display unit, in the case of multiple
NavNet display units. For further details
see the Installation Manual.
A, B, C, D
Range &
Bearing
Mode
Chooses how to calculate range and
bearing.
Rhumb Line: Straight line drawn between two
points on a nautical chart.
Great Circle: Shortest course between two
points on the surface of the earth.
(Continued on next page)