Furuno 1823C Marine RADAR User Manual


 
SP - 4 E3503S02J-M
03/09/24
NMEA 0183 Ver1.5 GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
DPT or DBT, DBS (ETR required),
TLL (L/L, Heading data required), TTM (ARPA required)
5 PLOTTER FUNCTION
5.1 Projection Mercator
5.2 Usable Area 85 latitude or below
5.3 Effective Area 211.2 x 158.4 mm
5.4 Display pixels 640 x 480 dots
5.5 Position Indication Latitude/longitude, Loran C LOP or DECCA LOP
5.6 Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)
5.7 Track Display Plot interval: by time (1 sec. to 99 min. 59 sec.) or
by distance (0 to 99.9 nm)
5.8 Colors Red, yellow, green purple, light-blue, blue, white
5.9 Memory Capacity Track/mark: 8000 points, Waypoint: 999 points
5.10 Storage Capacity Simple route: 200 routes with 35 waypoints each
5.11 MOB 1 point
5.12 Quick Routes 1 course with 35 waypoints max.
5.13 Electronic Chart FURUNO chart card or NAVIONICS chart card available
C-MAP chart card also available for C-MAP NT Model
5.14 Alarms Arrival and Anchor watch, Cross track error and proximity
alarms, Ship’s speed in and out alarms, Water temperature,
Trip alarm, Fish alarm, Bottom alarm (ETR required)
6 POWER SUPPLY
6.1 Rated Voltage/Current
M1823C 12-24 VDC: (5.5-2.7 A)
M1833C 12-24 VDC: 5.3-2.6 A (6.4-3.1 A)
M1933C (24rpm) 12-24 VDC: 5.9-2.8 A (7.0-3.3 A)
M1933C (48rpm) 12-24 VDC: 7.5-3.6 A
M1943C (24rpm) 12-24 VDC: 6.6-3.2 A (7.7-3.6 A)
M1943C (48rpm) 12-24 VDC: 8.1-3.8 A
M1953C (24rpm) 12-24 VDC: (8.9-4.4 A)
M1953C (48rpm) 12-24 VDC: (10.3-5.1 A)
( ): for high brilliance monitor
6.2 Rectifier (option) 100-115/220-230 VAC, 1 phase, 50/60 Hz