Filter
Top Products
6. CHART OVERVIEW
6-3
6.1.2 Status bar
The Status bar mainly provides for selection of operating mode, chart type and IMO
chart display setting.
No. Button name Description
1 Operating mode Selects the operating mode: Radar, or Chart for Radar.
2 NAVI Selects the Voyage navigation mode.
3 CHARTS Goes to the Chart maintenance mode.
4 PLAN Selects the Voyage planning mode.
5 OTHERS • Plays back log.
• Sets system in standby.
6 CHART ONLY Shows only the chart, when left button is pressed and held down.
7 STD DISP Restores the IMO standard display instantly.
8 Chart priority No use.
9 Chart database Selects the pre-defined presentations of ENC content: IMO BASE, IMO
STD or IMO ALL. CUSTOM appears when the symbols selected or de-
selected on the [Chart Display] menu do not match the preset conditions
for IMO BASE, IMO STD or IMO ALL.
10 ? Displays the operator's manual, chart (ECDIS) program no. and system
information.
11 Settings Manages user profiles; opens the Settings menu.
12 Date • Displays the date.
• Selects the time to use, local or UTC.
• Sets the time difference between local and UTC (to use local time).
13 Time Time (local or UTC)
14 Spinner Rotates clockwise if the system is working properly. If it is not spinning
the system is not working. Shortly after it stops spinning the buzzer
sounds. Reset the power to restore normal operation.
NAVI