Filter
Top Products
12. ROUTES
12-8
12.3.5 How to use the Check results page
The [Check Results] page allows you to make safe water calculation for your route.
Click the [Check Route] button to do the check. After the button is operated, the alert
type and latitude and longitude position of the alert appear for applicable legs on the
route.
Note: In order to display charts with correct updated situation, always use current date
during your voyage. If your voyage lasts more than one week, set current date at least
once per week during your voyage.
12.4 How to Import a Route Created with ECDIS
FEA-2x07
Routes created at the ECDIS FEA-2x07 can easily be imported to this ECDIS. Copy
the routes to a folder (see chapter 17 in the operator’s manual of the FEA-2x07) in a
USB flash memory then do as follows:
1. Set the USB flash memory to the USB port on the Control Unit.
2. Activate the Voyage planning mode.
3. Click the [Manage Data], [Data Import] and [Route] buttons to show the [SELECT
DIRECTORY] dialog box.
USB Flash 04.04.2012 19:23