Filter
Top Products
1-11
Separate type control head kit (Type: OP03-151, No.: 008-485-530)
emaNepyTytQ.onedoCskrameR
.yssAelbaCP1/P02BS642LU1218-041-0002249S30,m01
teeFrebbuR3005-JS4787-108-000epat/w
revoCtnorFrotinoM1631-552-301043-362-001
etalPgnixiFBK1961-441-301049-362-001
etalPeldnaH2361-441-301140-862-001
BKrevoctsuD3961-441-301067-172-001
wercS01x4M3644-188-000
lebaL1101-300-681032-632-001
rebbuRpihsnoN4961-441-301067-172-001
Display unit modification procedure
1. Raise the monitor unit referring to procedure for tabletop mounting on page 1-
8.
2. Unplug two connectors from the control head cable (P412 from MOTHER Board
and J583 and unfasten two earth wires.
MB 03P9251
INT
03P9252
J583
P412
J418
Earth Wire
PTU COVER
Control Head
Cable
Figure 1-13 Display unit, inside view
3. Lower the monitor.