Filter
Top Products
134
Depth Lines
(Advanced)
Settings: Off, On; Default = On
Depth Lines divide the display into four equal sections which are separated
by three horizontal depth lines. The depth of each line is displayed along the
depth scale. You can turn Depth Lines On or Off.
SI Range Lines
(Advanced, Side Imaging® View only)
Settings: Off, On; Default = On
SI Range Lines divide each side beam range into four equal sections on the
display. SI Range Lines can be used to interpret the location of objects on the
display. You can turn SI Range Lines On (visible) or Off (hidden).
NOTE:The rangenumbersareestimated and should not be usedfor measurement.
NOTE: If both SI Range Lines and Contour Mode are turned on, the SI Range
Lineswillremainon the display,but theindividual range numbers are notavailable
(see Side Imaging® X-Press™ Menu: SI Enhance).
Depth Lines
Depth Lines
Sonar Menu Tab