Filter
Top Products
MENU Key
The MENU key is used to access the menu system.
Start-Up Options Menu - Press the MENU key during the power up
sequence to view the Start-Up Options menu.
X-Press™ Menu - Press the MENU key once for the X-Press™ Menu. The
X-Press™ Menu allows you to access frequently-used settings without
having to navigate through the whole menu system. When the X-Press™
Menu is displayed, you can use the UP or DOWN Cursor keys to move to a
particular menu choice. As soon as you alter a parameter (using the RIGHT
or LEFT Cursor keys) the X-Press™ Menu will collapse temporarily, and the
screen will update if it is affected by your menu setting change, allowing you
to see the effects of your action immediately. Reactivate the X-Press™ Menu
by using the UP or DOWN Cursor keys.
Main Menu - Press the MENU key twice for the tabbed Main Menu System.
The Main Menu System is organized under tabbed headings to help you find
a specific menu item quickly: Alarms, Navigation, Chart, Setup, Views, and
Accessories tabs are part of your tabbed Main Menu System. Use the LEFT or
RIGHT 4-WAY Cursor Control key to select a tab; then use the DOWN or UP key
to select the menu item, and the LEFT or RIGHT key to alter a menu setting.
4-WAY Cursor Control Key
The 4-WAY Cursor Control Key has multiple functions,
depending on the situation:
Active Cursor - In any Bird's Eye View, the 4-WAY Cursor Control key controls the
motion of the eyepoint. In any Chart View, the 4-WAY Cursor Control key pans the
charts.
NOTE: You can also make the cursor move diagonally by pressing in between
two of the arrows on the 4-WAY Cursor Control key.
Menu Selection - Use the DOWN or UP arrow keys to select a menu choice
from the menu list, then use the LEFT or RIGHT arrow keys to change a menu
setting.
NOTE: Menu choices are implemented and saved immediately - no further action
is required.
VIEW PRESET Keys
The VIEW PRESET keys are used to program your three favorite
views for quick retrieval. Instead of using the VIEW key to
cycle through every view to find the one you want, you can program the
VIEW PRESET keys to display a specific view immediately. To program each
VIEW PRESET key, use the VIEW key to cycle to the view you want to store.
Press and hold one of the VIEW PRESET keys for several seconds. A series of
audible chirps will be heard indicating that the view has been programmed
to the key. You can store up to three views, one on each key.
17
531569-1_B - 955c ManE.qxp 3/4/2007 5:03 PM Page 17