Filter
Top Products
Track Min Distance
(Advanced)
Track Min Distance allows you to set a minimum distance of travel before a
trackpoint is added to the track.
NOTE: Track Min Distance works in conjunction with Trackpoint Interval. Both
conditions must be met before a trackpoint is added to the current track.
To change the Track Minimum Distance setting:
1. Make sure you are in Advanced User Mode, then highlight Track
Min Distance on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Track Min Distance setting. (1 to 300 feet or 1 to 100 meters
[International Units only], Default = 16 ft, 5 m)
NOTE: During slow travel or drift, setting both Trackpoint Interval and Track Min
Distance to small values will allow you to increase the track resolution.
Track Color Range
Track Color Range allows you to set the
depth range that will be displayed as black, the deepest depth, when Color
By Depth is selected as the style for the current track (see Navigation Menu
Tab: Current Track).
T
o change the Track Color Range:
1. Highlight Track Color Range on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Track Color Range setting. (50 to 3000 feet or 20 to 1000 meters
[International Units only], Default = 50 ft, 20 m)
Map Datum
(Advanced)
Map Datum allows you to change the map coordinate system used by the
900 Series™ to match those of a paper map.
To change the Map Datum setting:
1. Make sure you are in Advanced User Mode, then highlight Map
Datum on the Navigation main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Map Datum setting. (Default = WGS 84)
61
531569-1_B - 955c ManE.qxp 3/4/2007 5:04 PM Page 61