Humminbird 997c Combo Fish Finder User Manual


 
Select
Readouts
(Advanced)
Select Readouts allows you to customize the
information displayed in individual digital readouts on
the left side of many views, including suppressing a
particular readout so that nothing is displayed; the
ability to customize readouts depends on the view
and whether you are navigating. This Advanced
feature allows you to select what data will be
displayed in each of 5 fixed-position data windows
arranged at the left edge of the Sonar View screen, or
whether a particular data window will be turned off,
displaying nothing in that area; you can access this
menu choice only when in Advanced User Mode (see
Setup Menu Tab: User Mode.)
Data windows can display readouts from supported accessories such as a
Speed accessory. Each data window can either be empty (Off) or contain one
of the following:
• Course • Time
Depth • Time + Date
• Off • Triplog
Position • Voltage
Aux. Temperature • Temperature
• Speed • Water Speed
Sonar-only Views, Not Navigating: On Sonar-only views, as long as you are
not navigating, all 5 readouts are customizable.
Other Views, Not Navigating: On any view with a chart, as long as you are
not navigating, two of the readouts are not customizable: the 2nd box
always displays Heading, while the 5th box always displays Speed. On the
Bird’s Eye View, when you are not navigating, there are four fixed info boxes
that show Depth, Heading, Position (Lat/Lon) and Speed. When you are
navigating in the Bird's Eye View, there are two columns of four boxes. The
first column shows Depth, Time To Go (TTG), Position (Lat/Lon), and Speed.
The second column shows Cross Track Error (XTE), Heading, Bearing, and
Distance To Go (DTG).
All Views, Navigating: When you are navigating, all readouts in all views
(even split screen views with a Sonar display) cannot be customized, with
the exception of the top readout info box, which is still customizable. In any
view, while you are navigating, the second readout box shows Heading, the
third box shows Bearing, the fourth box is divided to show Cross Track Error
(XTE) and Distance To Go (DTG), and the fifth box is divided to show Time To
Go (TTG) and Speed.
Select Readouts
111