Filter
Top Products
Measurement method
Frequency range
Type of emission
Channel spacing
Frequency stability
Number of channels
Antenna connector
Power supply requirement
Current drain (approx.)
Operating temperature range
Dimensions (proj. not included)
Weight
(approx.)
RF output power (High/Low)
Modulation system
Maximum frequency deviation
Spurious emissions
Adjacent channel power
Input impedance
Receive system
Intermediate frequencies
Sensitivity (typical)
Adjacent channel selectivity (typical)
Spurious response
Intermodulation (typical)
Audio output power
Audio output impedance
IC-FR3000 IC-FR3100
SECTION 1 SPECIFICATIONS
1- 1
All stated specifications are subject to change without notice or obligation.
RECEIVER TRANSMITTER GENERAL
EIA / TIA-603 ETS 300 086
[USA2], [GEN2], [GEN4], [GEN74], [EUR2], [FRG2]: 150.000–174.000 MHz
[GEN74]: 148.000–172.000 MHz
Wide (25 kHz): 16K0F3E
Middle (20 kHz): 14K0F3E
Narrow (12.5 kHz): 8K50F3E
[USA2], [GEN2], [GEN4], [GEN74], [EUR2]: 25/12.5 kHz
[FRG2]: 20/12.5 kHz
±2.5 ppm ±1.0 kHz
Max. 32 channel
Type-N
× 2 (50 Ω)
[USA2], [GEN2]: 100–120 V
[GEN4], [GEN74], [EUR2], [FRG2]: 220–240 V
13.6 V DC (negative ground) 13.2 V DC (negative ground)
TX (at 50 W) 15.0 A TX (at 25 W) 10.0 A
RX (max. audio) 2 A
(stand-by) 1 A
–30˚C to +60˚C (–22˚F to +140˚F) –25˚C to +55˚C
410(W) × 110(H) × 360(D) mm; 16.1 (W)
×4.3 (H) × 14.1 (D) inch
12 kg; 26.5 lb
50/10 W 25/5 W
Variable reactance frequency modulation
[Wide]: ±5.0 kHz, [Middle]: ±4.0 kHz, [Narrow]: ±2.5 kHz
70 dBc typical 0.25 µW ≤ 1GHz, 1.0 µW > 1 GHz
[Wide], [Middle]: 70 dB, [Narrow]: 60 dB
600 Ω
Double-conversion superheterodyne system
1st: 31.65 MHz, 2nd: 455 kHz
0.5 µV at 12 dB SINAD 6 dBµV (emf) at 20 dB SINAD
[Wide], [Middle]: 70 dB, [Narrow]: 60 dB
70 dB
70 dB
2.5 W typical at 10% distortion with a 4 Ω load
4 Ω
AC
DC
TX
RX