Filter
Top Products
11
BASIC OPERATION
New2001
4
■ Receiving
Make sure charged Ni-Cd or brand new alkaline batteries are
installed (p. 5).
qPush [PWR] for 1 sec. to turn power ON.
wPush [Y] or [Z] to set the desired audio level.
• The frequency display shows the volume level while setting. See
the section at right for details.
eSet the receiving frequency. (p. 9)
rSet the squelch level. (p. 12)
• While pushing [SQL], rotate [DIAL].
• The first click of [DIAL] indicates the current squelch level.
•“LEVEL 1” is loose squelch and “LEVEL 9” is tight squelch.
•“AUTO” indicates automatic level adjustment with a noise pulse
count system.
• Push and hold [SQL] to open the squelch manually.
tWhen a signal is received:
• Squelch opens and audio is emitted.
• The S-meter shows the relative signal strength level.
■ Setting audio volume
The audio level can be adjusted through 32 levels.
➥ P
ush [Y] or [Z] to adjust the audio level.
• Beep tone sounds while setting. The tone sound let you know the
approximate sound level.
• Pushing and holding either key change the audio level continu-
ously.
• The display shows the volume level while setting.
[Z]
[Y]
INDICATION AUDIO LEVEL
Minimum setting
(no audio)
Muximum setting
Initial setting
q [PWR]
e Set frequency
r Set squelch level
w Set audio level
e Select band
r Push for setting
the squelch
(Push to monitor)
IC-R5_1.qxd 02.10.23 11:28 Page 11 (1,1)