Filter
Top Products
34
7
PRIORITY WATCH
New2001
7
DD
VFO scan watch
qSelect memory mode.
• Select a memory bank, if desired.
wPush [MODE•SCAN] for 1 sec. to start memory/bank scan,
if desired.
When scanning memory/bank channels:
Starts memory/bank scan first. Memory/bank scan can-
not be started after VFO scan is started.
ePush [TS•SET] for 1 sec. to enter set mode.
rRotate [DIAL] to select “PRIO” item.
tWhile pushing [FUNC], rotate to turn the priority watch ON.
• Select “BELL” if the priority beep function is necessary.
yPush [TS•SET] to exit set mode and start the watch.
•“PRIO” indicator appears.
uPush [MODE•SCAN] for 1 sec. to enter scan type selection
condition.
iRotate [DIAL] to select the desired scan type from “ALL,”
“BAND” and “PROGxx
(xx= 0–24).”
oPush [MODE•SCAN] to start the VFO scan watch.
• The receiver checks the memory channel(s) every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 31)
!0Push [TS•SET] to cancel the watch and scan.
FM SKIPP
PRIO
FM
PRIO
FM SKIPP
PRIO
FM
PRIO
• During VFO scan watch
Searches VFO frequen-
cies for 5 sec.
Pauses on a memory
(bank) channel when a
signal is received.
• During VFO scan watch with priority beep
Emits beep and blinks “S” indicator when a signal is
received on a memory (bank) channel.
IC-R5_1.qxd 02.10.23 11:29 Page 34 (1,1)