Filter
Top Products
64
13
SPECIFICATIONS
12
13
DD
GENERAL
• Frequency coverage : (Unit: MHz)
USA 0.150–823.995, 849.000–868.995,
894.000–1309.995
France 0.150–29.995, 50.200–51.200,
87.500–108.000, 144.000–146.000,
430.000–440.000,
1240.000–1300.000
Other than above 0.150–1309.995 MHz
• Number of memory channels : 1250 (incl. 50 scan edges and 200
auto write channels)
• Frequency resolution : 5, 6.25, 8.33,* 9*, 10, 12.5, 15, 20,
25, 30, 50, 100 kHz
*selectable depending on the operating frequency band.
• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F
• Reference frequency stability : ±6 ppm (–10°C to +60°C)
• Power supply requirement : 2 AA (R6) alkaline calls
2 AA (R6) Ni-Cd or Ni-MH cells
6.0 V DC ±5% (with AC adapter or
CP-18A/E)
• Current drain
(at 3.0 V DC: approx.):
standby (power saved) 41 mA typical
max. audio 170 mA typical
charging
(at 6.0 V DC)
120 mA typical
• Antenna connector : SMA
(50 Ω)
• Dimensions (proj. not included) : 58(W) × 86(H) × 27(D) mm
2
9
⁄32
(W)×3
3
⁄8
(H)×1
1
⁄16
(D) in
• Weight (approx.) : 185 g; 6.5 oz
DD
RECEIVER
• Receive system : Triple-conversion superheterodyne
• Intermediate frequencies : 1st: 266.7 MHz, 2nd: 19.65 MHz,
3rd: 450 kHz
• Sensitivity and squelch sensitivity (except spurious points):
FM (1 kHz/3.5 kHz Dev.; 12 dB SINAD)
1.625–4.995 MHz 0.32 µV typ.
5.000–179.995 MHz 0.2 µV typ.
118.000–246.995 MHz 0.18 µV typ.
247.000–329.995 MHz 0.2 µV typ.
330.000–469.995 MHz 0.18 µV typ.
470.000–832.995 MHz 0.28 µV typ.
833.000–999.995 MHz 0.28 µV typ.
1000.000–1309.995 MHz 0.35 µV typ.
WFM (1 kHz/52.5 kHz Dev.; 12 dB SINAD)
76.000–108.000 MHz 0.89 µV typ.
175.000–221.995 MHz 0.71 µV typ.
470.000–770.000 MHz 1.0 µV typ.
AM (1 kHz/30% MOD.; 10 dB S/N)
0.495–4.995 MHz 1.3 µV typ.
5.000–29.995 MHz 0.71 µV typ.
118.000–136.000 MHz 0.56 µV typ.
222.000–246.995 MHz 0.56 µV typ.
247.000–329.995 MHz 0.71 µV typ.
• Selectivity :
AM/FM More than 15 kHz/–9dB
Less than 30 kHz/–60 dB
WFM More than 150 kHz/–6dB
•
AF output power (at 3.0 V DC)
: 100 mW typical at 10% distortion with
an 8 Ω load
• Ext. speaker connector : 3-conductor 3.5 (d) mm (
1
⁄8″)/8 Ω
All stated specifications are subject to change without notice or obligation.
IC-R5_1.qxd 02.10.23 11:29 Page 64 (1,1)