Icom IC-R5 Marine Radio User Manual


 
43
9 SET MODE
New2001
DD
Key lock effect
While the key lock function is ON, [Y]/[Z] and [SQL] can still
be accessed. Accessible switches can be set to one of 4
groups.
[PWR] and [FUNC]+[BAND ] are also accessible during
the lock, however, these switches are not effected by this set-
ting.
NORMAL: [Y]/[Z] and [SQL] are accessible. (default)
NO SQL : [SQL] is accessible.
NO VOL : [Y]/[Z] are accessible.
ALL : No accessible switch is available, except
[PWR] and [FUNC]+[BAND ].
DD
Dial speed acceleration
The dial speed acceleration automatically speeds up the tun-
ing dial speed when rotating [DIAL] rapidly.
ON : The dial speed acceleration is tuned ON.
(default)
OFF : The dial speed acceleration is turned OFF.
DD
Monitor switch action
The monitor switch, [SQL], can be set as a sticky switch.
When set to the sticky condition, each push of [SQL] toggles
the monitor function ON and OFF.
PUSH : Pushing and holding [SQL] to monitor the fre-
quency. (default)
HOLD : Push [SQL] momentarily to monitor the fre-
quency and push momentarily again to cancel it.
Push and hold [SQL] to monitorPush to monitor
The acceleration ON The acceleration OFF
Normal lock condition
Audio output can be adjusted
Squelch level can be adjusted
Receiver power and lock
function only switchable
IC-R5_1.qxd 02.10.23 11:29 Page 43 (1,1)