Filter
Top Products
39
SET MODE
New2001
9
■ General
Set mode is used for programming infrequently changed val-
ues or conditions of functions.
In addition, the IC-R5 has an expanded set mode which is
used for programming even more infrequently changed val-
ues or conditions of functions. When turning the expanded
set mode OFF, only half of the set mode items are displayed
for simple operation.
DD
Set mode entering and operation
qPush [TS•SET] for 1 sec. to enter set mode.
wRotate [DIAL] to select the desired item.
eWhile pushing [FUNC], rotate [DIAL] to select the desired
value or condition.
rPush [TS•SET] to exit set mode, or rotate [DIAL] to select
another set mode item.
DD
Expanded set mode ON/OFF
qPush [TS•SET] for 1 sec. to enter set mode.
wRotate [DIAL] to select “EXPAND” item.
eWhile pushing [FUNC], rotate [DIAL] to turn the expanded
set mode ON and OFF.
rRotate [DIAL] to select the desired item.
tWhile pushing [FUNC], rotate [DIAL] to select the desired
value or condition.
yPush [TS•SET] to exit set mode, or rotate [DIAL] to select
another item.
Expanded set mode OFF Expanded set mode ON
[TS•SET]
[FUNC]
[DIAL]
IC-R5_1.qxd 02.10.23 11:29 Page 39 (1,1)