Filter
Top Products
New2001
q
w
iR5
■ VFO and memory mode selection
POCKET GUIDE
Push [V/M•S.MW•~] to toggle
between VFO and memory mode.
➥
■ Receive mode selection
Push [MODE•SCAN] several
times to select the desired mode
➥
■ Audio level setting
Push [Y] to increase, push [Z]
to decrease the audio level.
➥
■ Squelch level setting
While pushing [SQL], rotate
[DIAL] to set the squelch level.
➥
■ Frequency band selection
Push [BAND• ] several times,
or while pushing [BAND• ],
rotate [DIAL] to select the desired
frequency band.
➥
■ Tuning step selection
Push [TS•SET], then rotate [DIAL]
to select the desired tuning step.
• Push [TS•SET] again to return to the
previous condition.
➥
■ Key lock function
While pushing [FUNC], push
[BAND• ] for 1 sec. to toggle
the key lock function ON and OFF.
• “ ” appears when the lock function
is in use.
➥
■ Frequency setting
Push [V/M•S.MW•~] to select
VFO mode.
Rotate [DIAL] to set the desired
operating frequency.
q
w
■ Memory channel selection
Push [V/M•S.MW•~] to select
memory mode.
Rotate [DIAL] to set the desired
memory channel.
• While pushing [FUNC], [DIAL]
rotation changes memory channel
in 10 channels steps.
q
w
e
■ Memory bank channel selection
Push [V/M•S.MW•~] to select
memory mode.
Push [BAND• ] several times,
or while pushing [BAND• ],
rotate [DIAL] to select the desired
bank.
Rotate [DIAL] to select the
desired bank channel.
■ Attenuator function
While pushing [FUNC], push
[SQL] to toggle the attenuator
ON and OFF.
• “ ” appears when the lock func-
tion is in use.
➥
66
15
POCKET GUIDE
Important operating instructions are summed up in this and the following
page for your simple reference.
By cutting along the line and folding on the dotted line, it will become a card
sized operating guide which can easily be carried in a card case or wallet,
etc.
q Cut w Fold
e Complete
<CUT HERE>
IC-R5_1.qxd 02.10.23 11:29 Page 66 (1,1)