Filter
Top Products
Selecting the TRIM tab goes to
one of the screens illustrated
below. ese screens display the
position of the installed single-
trim tab or dual-trim tabs.
Selecting the MAIN tab goes to
the screen illustrated in the next
column. Any information avail-
able to the instrumentation system
may be selected by the driver to
be displayed in this screen. is
screen is organized into four (4)
quadrants with the user-selected
information digitally displayed in
each quadrant.
To change the information dis-
played simply:
• Press the UP or DOWN ar-
rows to highlight the quadrant
that you wish to change
• Press SELECT to access the
pull down menu
• Using the UP or DOWN arrows highlight the desired infor-
mation.
• Press SELECT again to store the change
MasterCra boats equipped with
the video display gauge feature
integrated Perfect Pass Wakeboard
Pro speed control soware.
e Perfect Pass application can be
entered by selecting the CRUISE
tab on the MENU screen or press-
ing the remote Perfect Pass button.
Perfect Pass is turned on and o
by pressing the remote perfect
pass button. Please refer to the
Perfect Pass manual for detailed
operating instructions.
All screens display a Perfect Pass
icon when the Perfect Pass system
is turned ON.
Selecting the SET UP tab goes to
the pick list illustrated below. It
contains all the system controls of
the video display gauge. is tab
permits control of alarms, speed-
ometer calibration, brightness and
contrast adjustment to name a few.
Using the UP and DOWN arrows
highlight the desired item and
press SELECT. Make the desired
changes and press MENU to save
and exit.
All system Warning Messages are
displayed on the video display
gauge. ey will stay on for a
minimum of 10 seconds but, can
be acknowledged and hidden by
pressing the MENU button. Once
acknowledged aer 10 seconds the
alarm will go away for 5 minutes.
If the alarm is still active it will
return aer the 5 minutes.
MasterCraft 2009 Owner’s Manual - Page 5-10