MasterCraft 2009 MariStar X-Series Boat User Manual


 
Quarterly (Every Fifty [50] Hours)
Note: MasterCra recommends that the following functions be
performed by authorized MasterCra technicians at an autho-
rized MasterCra dealer.
Before the engine has been started or aer it has cooled:
Lubricate the engine starter gear and sha.
Check the safety equipment.
Annually (Every One
Hundred [100] Hours)
Note: MasterCra recommends that the
following be performed by authorized
MasterCra technicians at an autho-
rized MasterCra dealer.
Before the engine has been started or aer
it has cooled:
Replace the fuel lter (to be per-
formed by an authorized MasterCra
technician only).
Check the propeller sha coupler
alignment.
Lubricate the steering system.
Lubricate the throttle and shi cables.
Check the engine mounts.
Inspect the complete fuel system for
leakage.
Check the re extinguisher and sup-
pression units on-board.
Details follow in the next few sections.
MasterCra recommends that many of
these functions be performed by authorized
MasterCra technicians at an authorized
MasterCra dealer!
MasterCraft 2009 Owner’s Manual - Page 15-2