Filter
Top Products
11
INSTALLATION
(4) Loosen the terminal screw and insert the cable into the terminal.
REMARKS
Information on blade terminals
Introduced products (as of Feb. 2012)
zPhoenix Contact Co.,Ltd.
Screw Size Tightening Torque Cable Size Screwdriver
M2 0.22N⋅m to 0.25N⋅m
0.3mm
2
to 0.75mm
2
Small flat-blade screwdriver
(Tip thickness: 0.4mm/tip width: 2.5mm )
CAUTION
Undertightening can cause cable disconnection or malfunction. Overtightening can cause a short circuit or
malfunction due to damage to the screw or unit.
Terminal Screw
Size
Wire Size
(mm
2
)
Blade Terminal Model
Blade terminal
crimping tool
with insulation sleeve without insulation sleeve
M2 0.3, 0.5 AI 0,5-6WH A 0,5-6
CRIMPFOX 6
When using the blade terminal (without insulation
sleeve), use care so that the twisted wires do not come