Filter
Top Products
930-110-01 PowerLogic
TM
E4800 Series
02/2009 Installation
© 2009 Schneider Electric All Rights Reserved
23
Normal Mode
In Normal mode, the Display button scrolls one or more of the following
information elements:
• Real Energy Delivered kWh D
• Real Energy Received kWh R
• Real Power Watts
• Reactive Energy Delivered KVarhD
• Reactive Energy Received KVarhR
• Reactive Power Var
In Normal mode, the right and left arrow buttons scroll the display from meter
points 1 to 8, 1 to 12, or 1 to 24, depending on your configuration.
Diagnostics Mode
Diagnostics mode is accessed by pressing and holding the Display button for
5 seconds. In Diagnostics mode, press the Display button to scroll through
the following information:
• Real energy consumption in kWh for the selected meter
• Real power in Watts for the selected meter
• Apparent
power in VA for the selected meter
• Voltage for the selected meter
• Current in amperes for the selected meter
• Configuration information showing phase setting and CT rating in
amperes
• Local IP address
• Send command
• Set default IP address
• Date and time (UTC)
In Diagnostics mode, the right and left arrow buttons scroll the display from
meter 1 through N. When the local IP address is shown on the LCD, use the
right and left arrow buttons to scroll through the following information:
• Remote host IP address
• Default IP address
• Default NetMask
• Default gateway
• PPP user name
• Phone number
• AT command string
• Alternate phone number
• Unit serial number
• Firmware build number
• Ethernet port MAC address
• Firmware revision
• Voltage transformer ratio