Filter
Top Products
7.3 Northstar 8000i / Simrad GB 40 using NMEA 0183 heading
The diagram below shows how to connect the radar to a Northstar 8000i or Simrad GB40 system
for vessels that use a NEMA 0183 heading sensor
For key information (page 33)
Key
Part
Number
Description
A AA010024SI
M
2 Kw Scanner comes with 15 m (49 ft) (NS003100) Cable attached.
Cable from Scanner connects to Radar Processor box. An Optional
longer cable is available but only upto 20 m (65.5 ft)
B NS003100
Optional 20 m (65.5 ft) Scanner cable. Will require disassembly of
dome to connect this replacement cable. Cable has radar processor
connector on one end and 3 small terminated flat connector on the
other
CAUTION: Installation of this cable should only be done by experienced
radar service technicians: Installation is difficult