Filter
Top Products
8.2 Connect the 2 kW radar processor to an M84 or M121 Display
A AA010024(SIM or
NOR)
2 kW Scanner comes with 15 m (49 ft) cable (B) Attached
NS003100
B NS003101 Optional Scanner cable 20 m (65.5 ft). Will require disassembly
of scanner to connect. The cable has a radar processor
connector on one end, and three small terminated flat
connectors on the other
CAUTION: Installation of this cable should only be done by an
experienced radar service technician
C AA010012
2 Kw radar processor. No cables supplied. Connects to displays
via RS485 protocol, using optional radar connection cable kit.
The 2 kW System is 12 V DC ONLY 25 W max.
D
Display Head NX40/45 or M84/121
E,F,G AA010112 Radar connection Kit (see "Parts needed" page 38)
H
Heading Sensor NMEA 0183
I AA010150 AT40
J
Heading Sensor SimNet RC 40 or RC 42 (NX Only)
K
GPS Antenna Simnet (NX Only)
L
Ships Power 12v DC Only. Radar and Display need to share the
same ground
M
Ships Ground