Filter
Top Products
CONTROLS/INSTRUMENTS/EQUIPMENTS
To Empty
NO TE: It is recomm ended to empty
ballast tanks after each use. Always
completely empty the tanks wat er
back to the same lake it came from,
do not transfer.
To empty ballast tanks
– Unscrew drain plugs and flush wa-
ter.
– Rinse thoroughly the ta nk s in terior
with fre sh tap water.
– When completed, clo se drain pl ugs
and tanks valve.
NO TE: It is not necessary to discon-
nect ballast tanks filling hose.
smo2008-001-050_a
TYP ICAL
1. D rain plug
WARNING
NEVER tow a water cr aft with w ater
remaining in the ballast tanks. The
weight of b allast tanks increases
the load on th e trailer, the axle and
the tir es , which could l ead to pre-
mature wear or failure. This al
so
contributes to reduce the stabil-
ity of your vehicle on the road by
raising the center of gravit
yofthe
trailer. Alw ays complete ly empty
the ballast tanks before trailering.
Remo val
Remova l procedure is the reverse of
installation, ensure to empty ta nk s be-
fore removing.
64
______________