Filter
Top Products
STORAGE AND PRESEASON PREPARATION
sbs2008-005-001_a
1. Intake hose (from intercooler)
2. Throttle body
2. Star t and rev up the engine to
4000 RPM s severa l times.
sbs2008-005-002
WATER EXPELLED FROM INTERCOOLER
3. Stop engine.
4. Liberal ly lubricate throttle body in-
side and out.
5. C lean off any lubrication on the
throttle body intake hose flange.
6. In stall air intake hose to t he throttle
body.
Throttle Body Lubrication
Lubricate throttle body with XP-S Lube
or an equivalent.
Use fitting for that purpose provided in
the engine com pa rtme nt.
With the engine not running, mak e
sure to spray lubricant at least 3 to 5
seconds for prope r lubrication.
smo2008-001-051_a
MODELS WITHOUT AN ENGINE COVER
1. Fitting
smo2008-001-052_a
MODELS WITH AN ENGINE C OVER
1. Fitting
Exhaust System Protection
In areas where temperat ure ma y
freeze, wa ter trappe d in the ex ha us t
system and interc ooler must be re-
moved.
Using the flushing c onnector o n jet
pump support, inject pressurized air
(around 689 kPa (100 PSI)) in to system
until th ere is no more water flo wi ng
from jet pump.
94
______________