Filter
Top Products
MAINTENANCE PRO CEDURES
Ride Plate and Water Intake
Grate
Ride Plate and Water Intake Grate
Inspection
Inspect ride plate and jet pump water
intake grate for dam a ge. Have da m -
aged parts repa ired.
WARNING
The DESS key should always be
remo ved from its post prior to in-
specting the intake grate.
F18J04Y
21
TYP ICAL — INS PECT THESE AREA S
1. W ater intake
2. Ride plate
Ski/Wa keboard Pos t
(if so e qui pped)
Ski/Wakeboard Post Inspection
Check ski/wa k eboa rd post opera tion.
Ensure it slides up a nd down easily.
Check locking mech an ism operat ion.
Check fasteners tightnes s . If some-
thing is found defective, don't use
ski/wakeboard pos t and see an autho-
rized Sea-Doo dea ler for repair.
Ski/Wakeboard Post Lubrication
Lubricate ski/wakeboa rd post t hrough
all its length. Pull out then push in sev-
eral times to d istribute the lubricant.
Body and Hull
Body and Hull Cleaning
Occasionally, wash the body with wa-
ter and soap (only use mild detergent).
Remove any marine organisms from
engine a nd/or hull. Apply non- abrasive
waxsuchassiliconewax.
NO TICE
Never clean fiberglass
andplasticpartswithstrongdeter-
gent, degreasing agent, paint thin-
ner, acetone, etc.
Stains may be remov ed from seat and
fiberglass with K night's S pra y -Nine
from K ork ay System Ltd or the equiva-
lent.
To clean the ca rpets , use 3M ™ Citrus
Base Cleaner (24 oz spay can) or the
equivalent.
Respect the environment by ensuring
fuel, oil or cleaning solutions do not
drain into the waterways.
WARNING
Periodically verify seat(s) lock pin
and tighten if needed. Make sure
seat(s) securely latches.
92
______________