Filter
Top Products
MONITORING SYSTEM
A system mo nitors the electronic com-
ponents of the EMS (engine man-
agement system) and other compo-
nents of the el ectrical system. When a
fault occurs, it sends visual messages
through the information center and/or
audible signals through a beeper to in-
form you of a particular condition.
When minor faults occur, the fault and
messa ge/beeper will disappear auto-
matically if the condition does not exist
anymore.
Releasing throttle and letting the en-
gine retu rning at idle speed may allow
normal operation to come back. If it
does not work, try removi ng a nd rein-
stalling the DESS key on its post.
The electronic system will react differ-
ently depending on the faul t type. In
severe failure, the engine might not be
allowed to be started. In other cases,
the engin e will op erate in limp home
mode (reduced speed).
When a fault occurs, see an a uthoriz ed
Sea-Doo dealer as s oon a s possible for
inspection.
Pilot Lamps and Message
Displ ay Information
The pilot lamps and message display
will inform you of a particular condition
or if an anomaly occurs.
smo2008-001-029_b
TYP ICAL
1. Pilot lamps
smo2008-001-026_a
TYP ICAL
1. Message display
PILOT
LAMPS (ON)
MESSAGE DISPLAY DESCRIPTION
MAINT Maintenance reminder
(12 V LOW/HI) Low/high battery voltage
FUEL-LOW Low fuel l evel
H-TEMP (EXHAUST
or ENGIN E)
Engine or exhaust system overheating
CHK ENG Check engine
118
______________