Filter
Top Products
MAINTENANCE PROCEDURES
WARNING
Certain components in the engine
compartment may be very ho t .
Direct contact may r esult in skin
burn.
Remove seat(s) to expose cooling sys-
tem expansion tank.
smo2007-002-005_c
TYP ICAL
1. Expansion tank
2. Cap
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir when
engine is c old.
F18E0NY
1
1. Level between marks when engine is cold
NO TE: The w atercraft is level when
it is in water. When on a trailer, raise
trailer tongue and block in this position
when bum per ra il is level.
Add coolant/deminerali zed water to
have the level between marks as re-
quired. Use a funnel to avoid s pillage.
Do not overfill.
NO TE: Use a blend of 50 % antifreez e
with 50% demineralized wa ter. Pre-
mixed antifreez e/wa ter is available
(P/N 293 60 0 038) a t your authorized
Sea-Doo dealer.
NO TE: Using a ble nd of 40% an-
tifreeze with 60% demineralized wa-
ter will improve the cooling efficiency
when w atercraft is used in particularly
hot we ather a nd/or hot water condi-
tion.
Properly reinstall and tighten filler cap
then reinstall seat extension.
NO TE: A cooli ng system that fre-
quently requires coolant is the indica-
tion of leak s or engine problems. See
an autho rized Sea-Doo dealer.
Engine Coolant Replacement
The coolant replacement should be
performed by an authorized Sea-D oo
dealer.
Throttle Body
Throttle Body Lubrication
Lubricate throttle body with XP-S Lube
or an equivalent.
Use fitting for that purpose provided in
the engine com pa rtme nt.
With the engine not running, mak e
sure to spray lubricant at least 3 to 5
seconds for prope r lubrication.
smo2008-001-051_a
TYP ICAL — G TI MOD ELS
1. Fitting
_______________
89