Ski-Doo WAKE Series Jet Ski User Manual


 
OPERATING INSTRUCTIONS
NO TICE
Never run engine longer
than 5 minutes. Drive line seal has
no cooling when watercraft is out of
water.
Close the water tap, then stop the en-
gine.
NO TICE
Always close the water
tap before stopping the engine.
NO TICE
Remove quick connect
adapter after flushing o peration (if
used).
Anticorrosion Treatment
To prevent corrosion, spray a corrosion
inhibitor (salt water resistant) such as
XP-S Lube or equivalent over metallic
components in engine compartment.
Apply dielectric grease (salt w ater re-
sistant) on b attery posts and cable con-
nectors.
NO TICE
Never leave rags or tools
in the engine compartment or in the
bilge.
Ballast S ys tem
WAKE Mo del s
NO TE: It is not necessary to discon-
nect ballast tanks filling hose.
It is recomm ended to empty ballast
tanks after each use.
Always completely empty the tanks
water back to the same lake it came
from, do not transfer.
To empty ballast tanks
Unscrew drain plugs and flush wa-
ter.
Rinse thoroughly the ta nk s in terior
with fre sh tap water.
When completed, clo se drain pl ugs
and tanks valve.
_______________
77