Filter
Top Products
SonicWALL GMS 7.0 Getting Started Guide Page 23
Configuring the All In One Role
All In One deployments are ideal for managing a small number of SonicWALL appliances
or for test environments. However, SonicWALL recommends that you use a multi-
system, distributed deployment in production environments, with the database on a
dedicated server and the other services on one or more systems. When only one other
system is deployed, the Console role should be assigned to it.
The All In One role provides all eleven services utilized by SonicWALL GMS:
• Database
• Event Manager
• Monitoring Manager
• Reports Database
• Reports Scheduler
• Reports Summarizer
• Scheduler
• Syslog Collector
• Update Manager
• Web Server
• Web Service Server
To deploy your SonicWALL GMS server in the All In One role, perform the following
steps:
1. Log into your UMH system interface by pointing your browser at the URL:
http://localhost/
2. On the Deployment > Role page under Host Role Configuration, select the All In
One radio button.
3. If this SonicWALL GMS server will connect to managed appliances through a GMS
gateway, type the gateway IP address into the GMS Gateway IP field. To determine
if a GMS gateway is required, see the SonicWALL GMS Gateway Recommendations
section, on page 6.
4. If a GMS gateway will be used, type the password into both the GMS Gateway
Password and Confirm GMS Gateway Password fields.
5. If this SonicWALL GMS server listens for syslog messages on a non-standard port,
type the port number into the Syslog Server Port field. The default port is 514.
6. Configure the database settings as described in the Configuring Database Settings
section, on page 28.
7. Configure the Web port settings as described in the Configuring Web Port Settings
section, on page 30.
8. To apply your changes, click Update.
To change the settings on this page back to the defaults, click Reset.