Filter
Top Products
Page 30
Configuring Web Port Settings
Web port settings configuration is largely the same on any role. To change the Web port
settings, perform the following steps:
1. On the Deployment > Settings page under Web Port Configuration, to use a
different port for HTTP access to the SonicWALL GMS server, type the port number
into the HTTP Port field. The default port is 80.
2. To use a different port for HTTPS access to the SonicWALL GMS server, type the
port number into the HTTPS Port field. The default port is 443.
3. Click Update to apply the Web port settings.
Note: Changing the Web port settings will cause the system to restart.
4. After the appliance restarts, use the new port to access the appliance management
interface. For example:
• If you changed the HTTP port to 8080, use the URL:
http://<IP Address>:8080/appliance/
• If you changed the HTTPS port to 4430, use the URL:
http://<IP Address>:4430/appliance/
Configuring SMTP Settings
The SMTP settings are used for sending email alerts to the SonicWALL UMH system
administrator.
If the Mail Server settings are not configured correctly, you will not receive important
email notifications, such as:
• System alerts for your SonicWALL GMS deployment performance
• Availability of product updates, hot fixes, or patches
• Availability of firmware upgrades for managed appliances
• Alerts on your managed appliances’ status
• Scheduled Reports