Filter
Top Products
local declination from a trusted source and set the value in Suunto
EON Steel .
To manually start calibration:
1. Keep the middle button pressed to enter the menu.
2.
Browse to General / Compass.
3.
Press the middle button to enter Compass.
4.
Press the middle button again to enter Declination.
5. Scroll up/down to set the angle of declination: Starting from 0.0º
scroll up towards East or down towards West declination.
To turn declination off, set declination angle to 0.0º.
6. Press middle button to save changes and go back to the
Compass menu.
7. Keep the middle button pressed to exit.
3.8.3 Setting bearing lock
A bearing is the angle between north and your target. In simple
terms, it is the direction you want to travel. Your heading, on the
other hand, is your actual direction of travel.
You can set a bearing lock to help you orientate yourself
underwater and ensure you maintain your direction of travel. For
example, you can set a bearing lock for the direction to the reef
before leaving the boat.
You can reset the bearing lock at any time, but you can only clear a
bearing lock while at the surface.
To set a bearing lock:
1. Press the middle button to change to the compass view.
27