Filter
Top Products
3.23.2 Open-circuit gases
As with diluents, you must alway define the correct oxygen and
helium percentages of bailout gas(es) for all your cylinders (and
additional gases) to ensure correct tissue and oxygen calculation.
Bailout gases for a rebreather dive are defined under OC gases in
the main menu.
3.23.3 Setpoints
CCR mode has two setpoint values, low and high. Both are
configurable:
•
Low setpoint: 0.4 – 0.9 (default: 0.7)
•
High setpoint: 1.0 – 1.6 (default: 1.3)
Typically you do not need to modify the default setpoint values.
However, you can change them as needed either in DM5 or under
the main menu.
To change setpoint values in Suunto EON Steel :
1. While in surface state, keep middle button pressed to enter main
menu.
2.
Scroll to
Setpoint
with the upper button and select with the
middle button.
3.
Scroll to
Low setpoint
or
High setpoint
and select with the
middle button.
4. Adjust the setpoint value with the lower or upper button and
accept with the middle button.
5. Keep middle button pressed to exit menu.
54