Filter
Top Products
very low, the display remains dark while charging until the battery
has reached an adequate charge level.
CAUTION: DO NOT use the USB cable when Suunto EON Steel is
wet. This may cause an electrical failure. Ensure the cable connector
and connector pin area on the device are both dry. If you are using
a protective boot, remove the boot from the connector pin area to
clear any residual water droplets.
NOTE: When connected, you may experience a tingling
sensation when touching a metallic computer housing and Suunto
EON Steel . This is caused by a minor electrical current created when
the wall plug to the computer is not grounded.
CAUTION: DO NOT allow the connector pins of the USB cable to
touch any conductive surface. This may short circuit the cable,
making it unusable.
Rechargeable batteries have a limited number of charge cycles and
may eventually need to be replaced. The battery should be replaced
only by authorized Suunto Service Centers.
4.5 Getting support
To get additional support, visit www.suunto.com/support. There
you will find a comprehensive range of support materials, including
Questions and Answers and instruction videos. You can also post
73