Filter
Top Products
No-fly time is always at least 12 hours and equals desaturation time
when it is more than 12 hours. For desaturation times shorter than
70 minutes, no no-fly time is displayed.
If decompression is omitted during a dive so that Suunto EON Steel
enters permanent error mode (see
3.3 Algorithm lock
), the no-fly
time is always 48 hours. Similarly, if dive is done in gauge mode
(bottom timer), the no-fly time is 48 hours.
WARNING: YOU ARE ADVISED TO AVOID FLYING ANY TIME THE
COMPUTER COUNTS DOWN THE NO-FLY TIME. ALWAYS ACTIVATE
THE COMPUTER TO CHECK THE REMAINING NO-FLY TIME PRIOR TO
FLYING! Flying or traveling to a higher altitude within the no-fly
time can greatly increase the risk of DCS. Review the
recommendations given by Divers Alert Network (DAN). There can
never be a flying-after-diving rule that is guaranteed to completely
prevent decompression sickness!
3.27 Suunto DM5 and Movescount
The Suunto DM5 software program allows you to track and analyze
all of your dive logs and plan your future dives. With DM5 you can
customize your Suunto EON Steel and update the device firmware.
Download Suunto DM5 from www.suunto.com/dm5.
NOTE: Mono framework is required when using DM5 on a Mac.
59