Filter
Top Products
NOTE: It is always recommended to keep close to the
decompression ceiling when ascending.
Ascent time is always the minimum time needed to reach the
surface. It includes:
•
Time required for deep stops
•
Ascent time from depth at 10 m (33 ft) per minute
•
Time needed for decompression
WARNING: YOUR ACTUAL ASCENT TIME MAY BE LONGER THAN
DISPLAYED BY THE DIVE COMPUTER! The ascent time will increase
if you: (1) remain at depth, (2) ascend slower than 10 m/min (33 ft/
min), (3) make your decompression stop deeper than at the ceiling,
and/or (4) forget to change the used gas mixture. These factors
might also increase the amount of breathing gas required to reach
the surface.
3.10.1 Last stop depth
You can adjust the last stop depth for decompression dives under
Dive settings / Parameters / Last stop depth. There are three options
3, 4.5 and 6 m (10, 15 and 20 ft).
By default, the last stop depth is 3 m (10 ft). This is the
recommended last stop depth.
36