Filter
Top Products
2. Hold your Suunto EON Steel in level in front of you, with the top
pointing in the direction to your target.
3.
Keep the lower button pressed until you see the Bearing locked
notification.
Once you have a bearing locked, the lock position is indicated on
the compass rose, as shown below.
Below your heading (large number in center of compass), you also
see the relative difference between your bearing and your heading.
So, for instance, when you want to travel in the exact direction of
your bearing, the lower number should be 0°.
If you want to set a new bearing lock, just repeat the same
procedure above. Each bearing lock is recorded in your dive log
with a time stamp.
To clear the bearing lock from your compass view, you need to
return to the surface.
To clear a bearing lock:
1. While in surface state, keep the middle button pressed to enter
the main menu.
2.
Scroll to GENERAL with the upper or lower buttons and press the
middle button.
28