Filter
Top Products
4.3 Changing strap to bungee
You can change between the wrist strap and bungee as needed.
The bungee is provided as an option.
To install the bungee:
1. Remove both strap ends using a TORX T7 (non-IP) screwdriver.
2. Attach the bungee adapters.
3. Thread the cord through both adapters.
4. Securely tie the ends of the bungee cord and cut off excess cord.
4.4 Charging battery
Fully charged, Suunto EON Steel provides min. 20 hours of dive
time. The expected lifetime of the rechargeable lithium-ion battery
is 500 cycles.
Charge Suunto EON Steel with the supplied USB cable. Connect the
cable to a USB wall charger or a computer USB port. If the battery is
72