Filter
Top Products
Preparing for installation
8
Preparing for installation
Prior to beginning your installation, review the “Important
Safety Instructions” on page v, and read the entire
“Installation” section so you can plan your installation from
beginning to end.
Installation codes
Applicable installation codes vary depending on the specific
location and application of the installation. Some examples
are:
• The U.S. National Electrical Code (NEC)
• The Canadian Electrical Code (NEC)
• NEC, Canadian Standards Association (CSA), and RV
Industry Association (RVIA) requirements for
installation in RVs.
It is the installer’s responsibility to determine which codes
apply, and to ensure that all applicable installation
requirements are met.
WARNING: Electrical shock and fire
hazards
Xantrex recommends all wiring be done by qualified
personnel. Disconnect all AC and DC power sources to
prevent accidental shock. Disable and secure all AC and
DC disconnect devices and automatic generator starting
devices.
It is the installer’s responsibility to ensure compliance
with all applicable installation codes and regulations.
CAUTION
Be sure to read all instructions before installing and
operating this inverter.