Filter
Top Products
v
Important safety information
General precautions
1. Before installing and using the inverter, read all
appropriate sections of this guide and any cautionary
markings on the inverter and batteries.
2. Do not operate the inverter if it has received a sharp blow,
been dropped, or otherwise damaged. If the unit is
damaged, see “Service during warranty” on page 48 and
“Returning a product” on page 49.
3. Do not disassemble the inverter; it contains no user
serviceable parts. Attempting to service the unit yourself
could cause electrical shock or fire. Internal capacitors
remain charged after all power is disconnected. See
“Warranty information” on page 48 for instructions on
obtaining service.
4. To reduce the risk of electrical shock, disconnect both
AC and DC power from the inverter before working on
any circuits connected to the inverter. Turning off the
front panel On/Off Switch will not reduce this risk.
5. Protect the inverter from rain, snow, spray, and bilge
water.
6. To reduce the risk of overheating or fire, keep the
ventilation openings clear, and do not install the inverter
in a zero-clearance compartment.
Important: Before installing and using your HI400
Inverter, be sure to read and save these safety instructions.