5: Commands and Levels
• host 10 (tunnel-connect-host:1:10)
• host 11 (tunnel-connect-host:1:11)
• host 12 (tunnel-connect-host:1:12)
• host 13 (tunnel-connect-host:1:13)
• host 14 (tunnel-connect-host:1:14)
• host 15 (tunnel-connect-host:1:15)
• host 16 (tunnel-connect-host:1:16)
• disconnect (tunnel-disconnect:1)
• modem (tunnel-modem:1)
• packing (tunnel-packing:1)
• serial (tunnel-serial:1)
• xml (xml)
T
able 5-1 Commands and Levels
accept (tunnel-accept:1) level commands
Enables the tunneling server to always accept tunneling
connections.
accept mode any character
Enables the tunneling server to accept tunneling connec-
tions only when a
character is received through the corresponding line (seri-
Disables accept mode tunneling.
accept mode modem control asserted
Enables the tunneling server to accept tunneling connec-
tions when the modem
accept mode modem emulation
Enables modem emulation for accept mode tunneling.
accept mode start character
Enables accept mode tunneling when the configured start
character
aes decrypt key <hexadecimal>
Sets the accept tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
aes decrypt key text <text>
Sets the accept tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
aes encrypt key <hexadecimal>
Sets the accept tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
aes encrypt key text <text>
Sets the accept tunnel AES encrypt key with up to 16
bytes.
XPort® Pro Lx6 Embedded Device Server Command Reference 39
