5: Commands and Levels
Exits to the next higher level.
Removes the remote host address used to establish tun-
neling connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Removes the remote port used to establish tunnel con-
nections.
Disables the connect mode TCP keep alive timeout.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode
tunneling.
Uses Telnet protocol (with IAC) for connect mode tunnel-
ing.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode
tunneling.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
show connection statistics
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
Stores the current configuration in permanent memory.
http (config-http) level commands
Creates a new HTTP server authentication directive.
<uri> = URI of the server.
Sets an HTTP server authentication directive to the Digest
Access
Authentication scheme.
<uri> = URI of the server.
Sets the authentication type for an HTTP server authenti-
cation directive to
none.
<uri> = URI of the server.
authentication timeout <minutes>
For any Digest AuthType, sets the timeout for authentica-
tion.
<minutes> = authentication timeout value.
Sets the HTTP counters to zero.
Clears the HTTP server log.
default authentication timeout
Resets the authentication timeout to its default value.
Restores the HTTP Server log format string to its default
value.
Resets the maximum bytes to its default value.
Restores the default maximum number of HTTP Server
XPort® Pro Lx6 Embedded Device Server Command Reference 74
