5: Commands and Levels
Enables the tunneling server to always establish tunneling
connections.
connect mode any character
Enables the tunneling server to establish a tunneling con-
nection when a
character is received on the corresponding line (serial
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connec-
tions when the modem
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured
start character
Enters the next lower level.
Restores the default connect mode as "disable".
Connects to the first host in the list that accepts the con-
nection.
Uses a random port number as the local port for establish-
ing tunneling
connections to other devices.
Restores the default reconnect time value for connect
mode tunneling.
Defaults the connect mode start character.
Sets an email profile to use to send an email alert upon
establishing
a connect mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
a connect mode tunnel.
<number> = the number of the email profile to use.
Returns to the tunnel level.
Characters already in the serial data buffer are retained
upon establishing
a connect mode tunneling connection.
Flushes the serial data buffer upon establishing a connect
mode tunneling
flush start character disable
Enables forwarding of the connect start character into the
network.
flush start character enable
Disables forwarding of the connect start character into the
network.
Enters the next lower level.
Specify the instance for the next lower level.
Connects to the first host in the list that accepts the con-
nection.
Selects simultaneous connections to all hosts on the host
list.
Disconnects the active connect mode tunneling connec-
tion or connections.
XPort® Pro Lx6 Embedded Device Server Command Reference 43
